Back to Blog
How-to Guides 2026-11-01 Cuddleco 8 views

Lana Dresser Changer: Setting Up a Nursery Changing Station

Lana Dresser Changer: Setting Up a Nursery Changing Station

Set up a calm, practical nursery changing station with the Lana Dresser Changer. Follow a simple step-by-step plan for placement, assembly checks and daily use.

Quick answer

Set up the Lana Dresser Changer as the anchor of your baby changing area: place it on level flooring away from heat and cords, assemble it fully before loading the drawers, and keep the changing surface clear except for a fitted mat and one reachable supply caddy.

Choose a position that works for night feeds, not just photos

A changing station earns its keep when you can reach it half-asleep. Put the dresser changer within a few steps of the cot or your bed, with enough clearance to stand square to the front rather than reaching sideways. Keep it off uneven flooring and away from radiators, windows with dangling cords and low shelves a toddler could climb.

Think about the room's traffic too. You need space to open drawers without backing into a rocking chair, and a wall nearby for a small caddy or hook. If the room is tight, a changing station on the dresser is often more practical than a separate table because the storage sits directly under the work surface.

Decide what belongs on top before you build

The surface should hold a fitted changing mat and little else. Nappies, wipes and cream belong in a caddy you can lift away or in the top drawer, not loose on the changer where a wriggling baby can send them flying. The Lana Dresser Changer's two-tone ash and white finish is neutral enough to sit in a contemporary or classic nursery, so let the furniture carry the look rather than crowding the top with decor.

One honest limitation: the supplied catalog details do not list a changing mat, anti-slip pad or wall-fixing kit in the box. Check the assembly instructions and product listing for what is included before you assume you have everything. If no wall strap is supplied, ask Cuddleco or a qualified fitter about a suitable anchor for your wall type.

Treat the dresser changer as furniture first, changing station second

A dresser changer combines storage and a changing surface, which is convenient but means you should not overload the drawers or lean your weight on the changing top. Distribute heavier items such as bulk nappy packs in lower drawers and keep the top drawer for light, frequently used items. Never leave a baby unattended on the changer, even for a moment, and always keep one hand on your baby during changes.

If you plan to use the changer through the toddler years, check the maximum load guidance in the instructions rather than guessing. The catalog facts do not state a weight limit, so the instruction manual is the source to trust.

Your step-by-step nursery changing station setup

  1. Clear and check the floor area: Measure the footprint of the Lana Dresser Changer plus at least 60 cm of standing room in front. Check the floor is level and remove rugs that could slip under the feet. Common mistake: placing it on a deep-pile rug, which makes the dresser feel unstable when you open drawers. Mark the final position with tape before assembly so you do not have to move a heavy dresser later.
  2. Assemble the dresser changer fully before loading it: Follow the supplied instructions in order, tightening all fixings only after the frame is square. Build it in the room where it will stand if doorway widths allow. Common mistake: tightening one side completely before the opposite side is aligned, which can rack the frame. Check that every drawer runs smoothly and the changer top is secure before you put anything inside.
  3. Secure the dresser to the wall if the instructions require it: Use the wall-fixing method specified in the manual for your wall type. If no fixing kit is supplied, source a suitable anchor rather than skipping this step. Common mistake: using a plasterboard plug in a cavity wall without checking the wall construction. If you rent or are unsure about the wall, ask a qualified fitter to confirm the fixing.
  4. Set up the changing surface: Place a fitted changing mat on the changer top, with the raised edges facing outward if the mat has them. Keep the mat clean and replace it if the surface cracks. Common mistake: stacking nappies and toys on the changer top, which reduces the clear changing area. Keep only the mat on top; move everything else to a caddy or drawer.
  5. Build a reachable supply caddy: Fill a small caddy with nappies, wipes, a spare bodysuit and nappy sacks, and place it within arm's reach of the changing position, not behind you. Common mistake: storing wipes on a high shelf, which tempts you to step away mid-change. Restock the caddy at the end of each day so night changes stay quick.
  6. Organise the drawers for one-handed use: Put the most-used items in the top drawer and heavier bulk packs in lower drawers. Leave a little space so drawers close without force. Common mistake: overfilling drawers until they jam, which strains the runners. Test each drawer after loading; if it sticks, remove items until it glides.
  7. Run a safety check before the first use: Confirm the dresser does not wobble, the wall fixing is tight if used, and there are no trailing monitor or lamp cords near the changing area. Common mistake: assuming the dresser is stable because it feels solid when empty; load it and test again. Recheck the wall fixing and drawer runners after the first week of use.

Product facts

  • Lana Dresser Changer - Ash & White: The Lana Dresser Changer has a neutral two-tone finish with delicate ash tones and a simple white painted finish. That neutral palette makes it easier to match existing nursery furniture and repaint or restyle the room later without replacing the changer.
    Lana Dresser Changer - Ash & White
    Lana Dresser Changer - Ash & White

Related Articles

Customer Service
Home
Products
Cart
Profile